Cisco Cisco Packet Data Interworking Function (PDIF)
System Recovery
▀ Accessing the boot CLI
▄ ASR 5000 System Administration Guide, StarOS Release 18
244
boot Command Syntax
The boot recovery command has the following syntax:
boot [ -show | -priority=* | -config=* | -noconfig ] { bootfile_URL }
The options for this command include:
-show: displays the current boot configuration
-priority=*: selects the desired boot stack priority (*)
-config=*: enters the desired configuration filename (*), if not the default file
-noconfig: boots using no configuration file
bootfile_URL is the URL for the location of the StarOS boot image file. It specifies the path and file name of the
StarOS .bin file from which the system will be booted.
StarOS .bin file from which the system will be booted.
The URL may refer to a local file (flash) or an external file on a memory device attached to the management card. The
URL must be entered in the following format:
URL must be entered in the following format:
{ /flash | /pcmcia1 | /usb1 }/filename