Cisco Cisco Packet Data Interworking Function (PDIF)
Session Recovery
Configuring the System to Support Session Recovery ▀
ASR 5000 System Administration Guide, StarOS Release 18 ▄
337
Disabling the Session Recovery Feature
To disable the session recovery feature on a system, enter the no require session recovery command from the Global
Configuration mode prompt.
Configuration mode prompt.
Important:
If this command is issued on an in-service system, then the system must be restarted by issuing the
reload command.
Viewing Session Recovery Status
To determine if the system is capable of performing session recovery, when enabled, enter the show session recovery
status verbose command from the Exec mode prompt.
status verbose command from the Exec mode prompt.
The output of this command should be similar to the examples shown below.
[local]host_name# show session recovery status
Session Recovery Status:
Overall Status : SESSMGR Not Ready For Recovery
Last Status Update : 1 second ago
[local]host_name# show session recovery status
Session Recovery Status:
Overall Status : Ready For Recovery
Last Status Update : 8 seconds ago
[local]host_name# show session recovery status verbose
Session Recovery Status:
Overall Status : Ready For Recovery
Last Status Update : 2 seconds ago
----sessmgr--- ----aaamgr---- demux
cpu state active standby active standby active status
---- ------- ------ ------- ------ ------- ------ ------------
1/1 Active 2 1 1 1 0 Good
1/2 Active 1 1 0 0 0 Good
1/3 Active 1 1 3 1 0 Good
2/1 Active 1 1 1 1 0 Good
2/2 Active 1 1 0 0 0 Good
2/3 Active 2 1 3 1 0 Good
3/0 Active 0 0 0 0 1 Good (Demux)
3/2 Active 0 0 0 0 1 Good (Demux)
4/1 Standby 0 2 0 1 0 Good
4/2 Standby 0 1 0 0 0 Good
4/3 Standby 0 2 0 3 0 Good
[local]host_name#
Session Recovery Status:
Overall Status : SESSMGR Not Ready For Recovery
Last Status Update : 1 second ago
[local]host_name# show session recovery status
Session Recovery Status:
Overall Status : Ready For Recovery
Last Status Update : 8 seconds ago
[local]host_name# show session recovery status verbose
Session Recovery Status:
Overall Status : Ready For Recovery
Last Status Update : 2 seconds ago
----sessmgr--- ----aaamgr---- demux
cpu state active standby active standby active status
---- ------- ------ ------- ------ ------- ------ ------------
1/1 Active 2 1 1 1 0 Good
1/2 Active 1 1 0 0 0 Good
1/3 Active 1 1 3 1 0 Good
2/1 Active 1 1 1 1 0 Good
2/2 Active 1 1 0 0 0 Good
2/3 Active 2 1 3 1 0 Good
3/0 Active 0 0 0 0 1 Good (Demux)
3/2 Active 0 0 0 0 1 Good (Demux)
4/1 Standby 0 2 0 1 0 Good
4/2 Standby 0 1 0 0 0 Good
4/3 Standby 0 2 0 3 0 Good
[local]host_name#