Cisco Cisco Packet Data Gateway (PDG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Routing
Bidirectional Forwarding Detection ▀
ASR 5000 System Administration Guide, StarOS Release 18 ▄
295
Configuring IPv6 BFD for Static Routes
Enable BFD on an Interface
config
context bfd_context_name
interface if_name
ipv6 address ipv6_address ipv6_mask
bfd interval interval_value min_rx rx_value multiplier multiplier_value
[ bfd echo ]
exit
Configure BFD static route.
ipv6 route static bfd if_name ipv6_gw_address
Add static routes.
ipv6 route ipv6_address ipv6_mask
ipv6 route ipv6_address ipv6_mask
Important:
On the ASR 5000, static routes with IPv6 prefix lengths less than /12 and between the range of /64
and /128 are not supported.
Configuring BFD for Single Hop
Enable BFD on an interface.
config
context bfd_context_name
interface if_name
ip address ipv4_address ipv4_mask
ipv6 address ipv6_address ipv6_mask
bfd interval interval_value min_rx rx_value multiplier multiplier_value
[ bfd echo ]
exit
Enable BFD on an OSPF Neighbor. For additional information, see