Cisco Cisco Packet Data Gateway (PDG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Routing
▀ Viewing Routing Information
▄ ASR 5000 System Administration Guide, StarOS Release 16
276
Viewing Routing Information
To view routing information for the current context, run one of the following Exec mode commands;
show ip route: Displays information for all types of routes in the current contexts routing table.
show ip static-route: Displays information only for static routes in the current contexts routing table.
show ip ospf: Displays OSPF process summary information in the current context.
show ipv6 ospf: Displays OSPFv3 process summary information in the current context.
This example shows sample output of the command, show ip route.
[local]host_name# show ip route
"*" indicates the Best or Used route.
Destination Nexthop Protocol Prec Cost Interface
*44.44.44.0/24 208.230.231.50 static 1 0 local1
*192.168.82.0/24 0.0.0.0 connected 0 0
*192.168.83.0/24 0.0.0.0 connected 0 0
208.230.231.0/24 0.0.0.0 ospf 110 10 local1
*208.230.231.0/24 0.0.0.0 connected 0 0 local1
Total route count: 5
"*" indicates the Best or Used route.
Destination Nexthop Protocol Prec Cost Interface
*44.44.44.0/24 208.230.231.50 static 1 0 local1
*192.168.82.0/24 0.0.0.0 connected 0 0
*192.168.83.0/24 0.0.0.0 connected 0 0
208.230.231.0/24 0.0.0.0 ospf 110 10 local1
*208.230.231.0/24 0.0.0.0 connected 0 0 local1
Total route count: 5
Equal Cost Multiple Path (ECMP)
The system supports ECMP for routing protocols. ECMP distributes traffic across multiple routes that have the same
cost to lessen the burden on any one route.
cost to lessen the burden on any one route.
config
context context_name
ip routing maximum-paths [ max_num ]
Notes:
Save your configuration as described in the Verifying and Saving Your Configuration chapter.