Cisco Cisco Packet Data Interworking Function (PDIF)
Troubleshooting
▀ Detecting Faulty Hardware
▄ ASR 5000 System Administration Guide, StarOS Release 16
208
Color
Description
Troubleshooting
None
Card is not receiving power.
OR
Card in Active Mode.
OR
Card in Active Mode.
Verify that the Run/Fail LED is green. If so, the card is receiving power
and POST test results are positive. If it is off, please refer to
and POST test results are positive. If it is off, please refer to
for information on troubleshooting.
for information on configuring the card to serve as a redundant
component.
Checking the LEDs on the SPIO
Each SPIO is equipped with the following status LEDs:
Run/Fail
Active
Standby
In addition to the LEDs listed above, each interface to the management network (both RJ-45 and SFP) are equipped
with the following LEDs:
with the following LEDs:
Link
Activity
Figure 14. SPIO LED Locations