Cisco Cisco Packet Data Gateway (PDG)
snmp trap link-status
Enables/disables the generation and sending of an SNMP (notification) trap when the port experiences a
change of state (up or down).
change of state (up or down).
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > ATM Port Configuration
configure > port atm slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
Syntax Description
[ no ] snmp trap link-status
no
Disables the sending of traps for link-status changes.
Usage Guidelines
Enable the sending of link-status change traps for this port if there is a monitoring facility that can use the
information or if there are troubleshooting activities in progress.
information or if there are troubleshooting activities in progress.
Examples
Use the following command to send SNMP link-status traps for this port:
snmp trap link-status
snmp trap link-status
Use the following command to disable the sending SNMP link-status traps for this port:
no snmp trap link-status
no snmp trap link-status
Command Line Interface Reference, Modes A - B, StarOS Release 19
1799
ATM Port Configuration Mode Commands
snmp trap link-status