Cisco Cisco Packet Data Gateway (PDG)
address-family ipv6
Enters the IPv6 Address Family configuration mode. Optionally, it also enables the Virtual Routing and
Forwarding (VRF) routing configuration mode, if specified.
Forwarding (VRF) routing configuration mode, if specified.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > BGP Configuration
configure > context context_name > router bgp as_number
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-bgp)#
Syntax Description
[ no ] address-family ipv6 [ vrf vrf_name ]
no
Removes the configured IPv6 address family VRF mode.
address-family ipv6
Enters the BGP Address-Family IPv6 mode to allow entry of IPv6 BGP parameters.
vrf vrf_name
Enables the exchange of VRF routing information. When this keyword is specified with this command, the
address family mode changes to VRF address family mode. vrf_name is the name of an existing VFR expressed
as an alphanumeric string of 1 through 63 characters.
address family mode changes to VRF address family mode. vrf_name is the name of an existing VFR expressed
as an alphanumeric string of 1 through 63 characters.
Usage Guidelines
Use this command to configure the IPv6 BGP address family configuration parameters for BGP router.
Use of the address-family ipv6 command switches the command mode to BGP Address Family Configuration
Mode and changes the CLI prompt to:
Mode and changes the CLI prompt to:
[
context_name
>]
host_name
(config-bgp-af-v6)#
Examples
Use the following command to enter the IPv6 BGP Address-Family configuration mode:
address-family ipv6
address-family ipv6
Command Line Interface Reference, Modes A - B, StarOS Release 19
1870
BGP Configuration Mode Commands
address-family ipv6