Cisco Cisco Packet Data Interworking Function (PDIF)
radius attribute
This command configures the system's RADIUS identification parameters.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-aaa-group)#
Syntax Description
radius attribute { accounting accounting_attribute | authentication authentication_attribute | nas-identifier
nas_id | nas-ip-address address primary_ipv4/ipv6_address [ backup secondary_ipv4/ipv6_address ] [
nexthop-forwarding-address nexthop_ipv4/ipv6_address ] [ mpls-label input in_label_value | output
out_label_value1 [ out_label_value2 ] [ vlan vlan_id ] ] }
no radius attribute { accounting accounting_attribute | authentication authentication_attribute |
nas-identifier | nas-ip-address }
default radius attribute { accounting | authentication | nas-identifier }
out_label_value1 [ out_label_value2 ] [ vlan vlan_id ] ] }
no radius attribute { accounting accounting_attribute | authentication authentication_attribute |
nas-identifier | nas-ip-address }
default radius attribute { accounting | authentication | nas-identifier }
no
Removes or disables the specified configuration.
default
Configures the default setting(s).
accounting accounting_attribute
Enables RADIUS accounting attributes for the following options, provided they are supported in the configured
RADIUS dictionary:
RADIUS dictionary:
• 3gpp-cg-address
• 3gpp-charging-characteristics
• 3gpp-charging-id
• 3gpp-ggsn-address
• 3gpp-ggsn-mcc-mnc
Command Line Interface Reference, Modes A - B, StarOS Release 19
78
AAA Server Group Configuration Mode Commands
radius attribute