Cisco Cisco Packet Data Interworking Function (PDIF)
timeout alcap
This command configures the timeout duration for various ALCAP procedure timers in ALCAP service.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > ALCAP Service Configuration
configure > context context_name > alcap-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-alcap-service-
service_name
)#
Syntax Description
timeout alcap
{
blo blo_timer_value
|
erq erq_timer_value
|
mod mod_timer_value
|
rel
rel_timer_value
|
res res_timer_value
|
ubl ubl_timer_value
}
default timeout alcap
{
blo
|
erq
|
mod
|
rel
|
res
|
ubl
}
default
Sets the timer values to default duration for specific ALCAP procedure in an ALCAP service.
blo blo_timer_value
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Path Block procedure. When a request to block a particular AAL2 path is
recieved by ALCAP service, the ALCAP service sends ALCAP-BLOCK-REQEST message to AAL2 node/peer
ALCAP Manage and starts Timer_BLO timer. The timer waits for specified timeout duration blo_timer_value
for ALCAP-BLOCK-CONFRIM message before reporting error in procedure.
reporting the failure of AAL2 Path Block procedure. When a request to block a particular AAL2 path is
recieved by ALCAP service, the ALCAP service sends ALCAP-BLOCK-REQEST message to AAL2 node/peer
ALCAP Manage and starts Timer_BLO timer. The timer waits for specified timeout duration blo_timer_value
for ALCAP-BLOCK-CONFRIM message before reporting error in procedure.
If AAL2 Node responds with ALCAP-BLOCK-CONFRIM message the timer will stop before the expiry of
timeout duration and system reports the successful completion of the procedure.
timeout duration and system reports the successful completion of the procedure.
blo_timer_value must be an integer value from 2 through 60.
Default: 5
erq erq_timer_value
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Establish Request procedure. When a request to esblish a connection through
ALCAP-ESTABLISH-REQUEST message is sent to AAL2 node the system starts the Timer_ERQ timer.
The timer waits for specified timeout duration erq_timer_value for ALCAP-ESTABLISH-CONFRIM message
reporting the failure of AAL2 Establish Request procedure. When a request to esblish a connection through
ALCAP-ESTABLISH-REQUEST message is sent to AAL2 node the system starts the Timer_ERQ timer.
The timer waits for specified timeout duration erq_timer_value for ALCAP-ESTABLISH-CONFRIM message
Command Line Interface Reference, Modes A - B, StarOS Release 19
1416
ALCAP Configuration Mode Commands
timeout alcap