Cisco Cisco Packet Data Interworking Function (PDIF)
radius probe-interval
This command configures the time interval between two RADIUS authentication probes.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-aaa-group)#
Syntax Description
radius probe-interval seconds
default radius probe-interval
default radius probe-interval
default
Configures the default setting.
seconds
Specifies the number of seconds to wait before sending another probe authentication request to a RADIUS
server.
server.
seconds must be an integer from 1 through 65535.
Default: 60
Usage Guidelines
Use this command for Interchassis Session Recovery (ICSR) support to set the duration between two
authentication probes to the RADIUS server.
authentication probes to the RADIUS server.
Examples
The following command sets the RADIUS authentication probe interval to 30 seconds.
radius probe-interval 30
radius probe-interval 30
Command Line Interface Reference, Modes A - B, StarOS Release 19
105
AAA Server Group Configuration Mode Commands
radius probe-interval