Cisco Cisco Packet Data Interworking Function (PDIF)
Bearer Control Profile Configuration Mode
Commands
Commands
The Bearer Control Profile configuration mode provides the commands to define the MME's bearer-level
QoS control parameters. Bearer-level parameters such as ARP, MBR, GBR, QCI remap value can be
configured independently for either or both default/dedicated bearers along with the capping action, such as
prefer-as-cap or pgw-upgrade, in bearer control profile. The bearer control profile can be applied for a specific
QCI or a range of QCIs.
QoS control parameters. Bearer-level parameters such as ARP, MBR, GBR, QCI remap value can be
configured independently for either or both default/dedicated bearers along with the capping action, such as
prefer-as-cap or pgw-upgrade, in bearer control profile. The bearer control profile can be applied for a specific
QCI or a range of QCIs.
The bearer control profile becomes valid after it is associated with an MME QoS profile.
Command Modes
Exec > Global Configuration > Bearer Control Profile Configuration
configure > bearer-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(bearer-control-profile-
bc_profile_name
)#
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
and installed license(s).
Important
•
•
•
•
•
Command Line Interface Reference, Modes A - B, StarOS Release 19
1811