Cisco Cisco Packet Data Interworking Function (PDIF)
BGP IP VRF Configuration Mode Commands
The Border Gateway Protocol (BGP) IP VRF (Virtual Routing and Forwarding) Configuration Mode is used
to configure properties for BGP-4 routing.
to configure properties for BGP-4 routing.
The VRF must have been preconfigured using the ip vrf command in the Context Configuration mode
before you can enter this configuration mode.
before you can enter this configuration mode.
Important
Command Modes
Exec > Global Configuration > Context Configuration > BGP Configuration > BGP-IP VRF Configuration
configure > context context_name > router bgp as_number > ip vrf vrf_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-bgp-vrf)#
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
and installed license(s).
Important
•
•
•
•
Command Line Interface Reference, Modes A - B, StarOS Release 19
1895