Cisco Cisco Packet Data Interworking Function (PDIF)
snmp trap link-status
Enables/disables the generation and sending of an SNMP (notification) trap when the port experiences a
change of state (up or down).
change of state (up or down).
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > BITS Port Configuration
configure > port bits slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
Syntax Description
[ no ] snmp trap link-status
no
Disables the sending of traps for link-status changes.
Usage Guidelines
Enable the sending of link-status change traps if there is a monitoring facility that can use the information or
if there are troubleshooting activities in progress.
if there are troubleshooting activities in progress.
Examples
Use this command to enable sending of link-status SNMP traps:
snmp trap link-status
snmp trap link-status
Use this command to disable sending of link-status SNMP traps:
no snmp trap link-status
no snmp trap link-status
Command Line Interface Reference, Modes A - B, StarOS Release 19
1913
BITS Port Configuration Mode Commands
snmp trap link-status