Cisco Cisco Packet Data Interworking Function (PDIF)
deactivate-predefined-rule
This command allows you to remove or deactivate the matched predefined rule/Group of Ruledefs (activated
by PCRF via Gx) that selected this action to ensure one time redirection for the subscriber.
by PCRF via Gx) that selected this action to ensure one time redirection for the subscriber.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-charging-action)#
Syntax Description
[ default | no ] deactivate-predefined-rule
default
Configures this command with its default setting.
Default: Disabled; same as no deactivate-predefined-rule
no
If previously enabled, disables the predefined rule in the current charging action.
Usage Guidelines
Use this command to ensure that the predefined rule/Group of Ruledefs gets deactivated after applying the
charging-action when configured. By default, the configuration is disabled. Static rules are not deactivated
by this command.
charging-action when configured. By default, the configuration is disabled. Static rules are not deactivated
by this command.
This feature is added in the ECSv2 to redirect traffic when quota for a user expires. When quota expires,
PCRF will install a rule for the redirection. In the charging-action for this redirection rule, an action to disable
the same rule will ensure one time redirection. A charging-rule-report will be sent to PCRF indicating the
PCC Rule Status as INACTIVE for the deactivated rule. Rule-Failure-Code sent is
RESOURCE_ALLOCATION_FAILURE.
PCRF will install a rule for the redirection. In the charging-action for this redirection rule, an action to disable
the same rule will ensure one time redirection. A charging-rule-report will be sent to PCRF indicating the
PCC Rule Status as INACTIVE for the deactivated rule. Rule-Failure-Code sent is
RESOURCE_ALLOCATION_FAILURE.
The deactivation will apply only for predefined rules/Group of Ruledefs. If a static rule is associated with the
charging-action, it will not be deactivated.
charging-action, it will not be deactivated.
Command Line Interface Reference, Modes A - B, StarOS Release 19
314
ACS Charging Action Configuration Mode Commands
deactivate-predefined-rule