Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
flow idle-timeout
This command allows you to configure the maximum duration a flow can remain idle after which the system
automatically terminates the flow.
automatically terminates the flow.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-charging-action)#
Syntax Description
flow idle-timeout { idle_timeout | flow-mapping flow_timeout }
{ default | no } flow idle-timeout [ flow-mapping ]
{ default | no } flow idle-timeout [ flow-mapping ]
no
Disables the idle-timeout configuration; sets the idle-timeout to 0 seconds.
default
Configures this command with its default setting.
Default: 300 seconds
idle-timeout idle_timeout
Specifies the maximum duration, in seconds, a flow can remain idle.
idle_timeout must be an integer from 0 through 86400.
flow-mapping flow_timeout
Specifies the maximum duration of flow-mapping timeout, in seconds.
flow_timeout must be an integer from 0 through 86400.
Usage Guidelines
Use this command to configure the maximum duration a flow can remain idle after which the system
automatically terminates the flow.
automatically terminates the flow.
Command Line Interface Reference, Modes A - B, StarOS Release 19
324
ACS Charging Action Configuration Mode Commands
flow idle-timeout