Cisco Cisco Packet Data Interworking Function (PDIF)
content-filtering mode
This command allows you to enable/disable the specified Category-based Content Filtering mode in the current
rulebase.
rulebase.
Product
CF
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-rule-base)#
Syntax Description
content-filtering mode { category { static-and-dynamic | static-only } | server-group cf_server_group }
no content-filtering mode
no content-filtering mode
no
If previously configured, deletes the content-filtering mode configuration from the current rulebase. Content
filtering will not to be performed for the current rulebase. This is the default setting.
filtering will not to be performed for the current rulebase. This is the default setting.
category { static-and-dynamic | static-only }
Specifies the Category-based Content Filtering mode.
• static-only: Configures Category-based Content Filtering in static only mode, wherein all URLs are
compared against an internal database to categorize the requested content.
Using Category-based Content Filtering support requires configuration of the require active-charging
content-filtering category command in the Global Configuration Mode.
content-filtering category command in the Global Configuration Mode.
• static-and-dynamic: Configures Category-based Content Filtering in Static-and-Dynamic mode, wherein
a static rating of the URL is first performed, and only if the static rating fails to find a match, dynamic
rating of the content that the server returns is then performed.
rating of the content that the server returns is then performed.
Command Line Interface Reference, Modes A - B, StarOS Release 19
619
ACS Rulebase Configuration Mode Commands
content-filtering mode