Cisco Cisco Packet Data Interworking Function (PDIF)
post-processing dynamic
This command allows you to specify ruledefs/group-of-ruledefs as dynamic post-processing
ruledefs/group-of-ruledefs. This allows the system to differentiate normal post-processing rules from
preconfigured ones. By default, this configuration is disabled.
ruledefs/group-of-ruledefs. This allows the system to differentiate normal post-processing rules from
preconfigured ones. By default, this configuration is disabled.
Product
ACS
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-rule-base)#
Syntax Description
post-processing dynamic { group-of-ruledefs ruledefs_group_name | ruledef ruledef_name } charging-action
charging_action_name [ description description ]
no post-processing dynamic { group-of-ruledefs ruledefs_group_name | ruledef ruledef_name }
no
If previously configured, deletes the specified configuration from the current rulebase.
group-of-ruledefs ruledefs_group_name
Adds the specified group-of-ruledefs to the current rulebase.
ruledefs_group_name must be the name of a group-of-ruledefs, and must be an alphanumeric string of 1
through 63 characters.
through 63 characters.
ruledef ruledef_name
Adds the specified ruledef to the current rulebase.
ruledef_name must be the name of a ruledef, and must be an alphanumeric string of 1 through 63 characters.
charging-action charging_action_name
Specifies the charging action.
charging_action_name must be the name of a charging action, and must be an alphanumeric string of 1 through
63 characters.
63 characters.
Command Line Interface Reference, Modes A - B, StarOS Release 19
700
ACS Rulebase Configuration Mode Commands
post-processing dynamic