Cisco Cisco Packet Data Gateway (PDG)

threshold total-hsgw-sessions

Configures alarm or alert thresholds for the total number of HRPD Serving Gateway (HSGW) sessions across
all services in the system.

Product

HSGW

Privilege

Administrator

Command Modes

Exec > Global Configuration

configure

Entering the above command sequence results in the following prompt:

[local]

host_name

(config)#

Syntax Description

threshold total-hsgw-sessions high_thresh [ clear low_thresh ]

high_thresh

Default: 0

Specifies the high threshold for the number of HSGW sessions for all HSGW services that must be met or
exceeded within the polling interval to generate an alert or alarm.

high_thresh is an integer from 1 through 2500000. A value of 0 disables the threshold.

clear low_thresh

Default: 0

Specifies the low threshold for the number of HSGW sessions for all HSGW services that maintains a previously
generated alarm condition. If the number of sessions falls beneath the low threshold within the polling interval,
a clear alarm will be generated.

low_thresh is an integer from 0 and 2500000. A value of 0 disables the threshold.

This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm model,
the system assumes it is identical to the high threshold.

Important

Usage Guidelines

Monitor and set alarms or alerts when the total number of HSGW sessions in the system is equal to or greater
than the set limit.

Command Line Interface Reference, Modes G - H, StarOS Release 19

932

Global Configuration Mode Commands (threshold ppp - url-blacklisting)

threshold total-hsgw-sessions