Cisco Cisco Packet Data Interworking Function (PDIF)
gtpp mbms tariff
Configures the tariff slots for tariff-based triggers for GTPP MBMS Charging Data Record (G-MBMS-CDR)
generation.
generation.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gtpp-group)#
Syntax Description
gtpp mbms tariff time1 mins hours [ time2 mins hours [ time3mins hours [ time4mins hours ] ] ]
no gtpp mbms tariff
no gtpp mbms tariff
no
Disables the tariff-based triggers for GTPP MBMS Charging Data Record (G-MBMS-CDR) generation.
tariff time1 mins hours [ time2mins hours [ time3mins hours [ time4mins hours ] ] ]
Specifies time-of-day time values to close the current statistics container (but not necessarily the accounting
record). Default: Disabled
record). Default: Disabled
The system assumes that the billing system uses the day/date to determine if the statistics container
represents an actual tariff period.
represents an actual tariff period.
Important
For each of the different tariff times, the following parameters must be configured:
• mins: Minute of the hour, an integer from 0 through 59.
• hours: Hour of the day, an integer from 0 through 23.
Usage Guidelines
Use this command to configure the tariff-time-based triggers for G-MBMS-CDR generation in MBMS user
data service.
data service.
Command Line Interface Reference, Modes G - H, StarOS Release 19
1162
GTPP Server Group Configuration Mode Commands
gtpp mbms tariff