Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
map nri
Configures the mapping of Network Resource Identifier (NRI) sent from UE to the MSC point code. This is
an important configuration for CS network resource sharing over Iu-Flex interface.
an important configuration for CS network resource sharing over Iu-Flex interface.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > HNB-CS Network Configuration
configure > cs-network cs_instance
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-cs-network-
instance_id
)#
Syntax Description
map nri range nri_start to nri_end point-code msc_point_code
no map nri range nri_start to nri_end
no map nri range nri_start to nri_end
no
Removes the entries of mapping of range of NRIs received from UE with particular MSC point code.
range nri_start to nri_end
Specifies the range of NRIs received from UE to map with pa articular MSC point code during initial CS core
network node selection.
network node selection.
nri_start is an integer from 0 through 1023 that should be less than nri_end.
nri_end is an integer from 0 through 1023 that should be more than nri_start.
The command can be entered more than once to map multiple NRI ranges to same MSC, but overlapping is
not allowed.
not allowed.
point-code msc_point_code
Specifies the SS7 address of the MSC in the CS network to map with a range of NRI values.
point_code is an SS7 point code in dotted-decimal ###.###.### or 8-digit decimal ######## format.
Usage Guidelines
Use this command to map a NRI received from UE during initial CS network node selection to MSC point
code through NRI range mapping over Iu-Flex interface.
code through NRI range mapping over Iu-Flex interface.
Command Line Interface Reference, Modes G - H, StarOS Release 19
1480
HNB-CS Network Configuration Mode Commands
map nri