Cisco Cisco Packet Data Interworking Function (PDIF)
card
Enters the Card Configuration mode for the specified card. (ASR 5x00 only)
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
card slot_number
slot_number
Specifies the slot number of the card for which the card configuration mode is to be entered. slot_number
must be an integer from 1 through 48 (on the ASR 5000) or 1 through 20 (on the ASR 5500).
must be an integer from 1 through 48 (on the ASR 5000) or 1 through 20 (on the ASR 5500).
Usage Guidelines
Enter the configuration mode for a specific card when changes a required.
This command is not supported on virtual platforms.
Important
Examples
The following command enters Card Configuration mode for the card in slot 8 of the chassis:
card 8
card 8
Command Line Interface Reference, Modes G - H, StarOS Release 19
123
Global Configuration Mode Commands (A-K)
card