Cisco Cisco Packet Data Interworking Function (PDIF)
ranap reset
Configures various Radio Access Network (RAN) Application Part reset procedure parameters for PS network
association in an HNB access network.
association in an HNB access network.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > HNB-PS Network Configuration
configure > ps-network ps_instance
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-ps-network-
instance_id
)#
Syntax Description
ranap reset { ack-timeout timer_value | guard-timeout g_timer | hnbgw-initiated | max-retransmissions
retries | use-actual-plmn
}
default ranap reset { ack-timeout | guard-timeout | hnbgw-initiated | max-retransmissions |
use-actual-plmn }
no ranap { hnbgw-initiated | use-actual-plmn }
use-actual-plmn }
no ranap { hnbgw-initiated | use-actual-plmn }
default
Resets the RANAP RESET parameters in HNB-PS Network configuration instance.
no
Disables the RANAP RESET procedure related parameters in an HNB-PS Network configuration instance.
ack-timeout timer_value
Sets the timer value (in seconds) to wait for Reset Acknowledge from SGSN. This is used during HNB-GW
initiated RANAP RESET procedure in HNB-PS Network configuration instance.
initiated RANAP RESET procedure in HNB-PS Network configuration instance.
timer_value is an integer value from 5 through 10. Default: 10
guard-timeout g_timer_value
Sets the timer value (in seconds) to send Reset Acknowledge to SGSN. After this duration the HNB-GW
sends RESET-ACK to SGSN. This is used during SGSN initiated RANAP RESET procedure in HNB-PS
Network configuration instance.
sends RESET-ACK to SGSN. This is used during SGSN initiated RANAP RESET procedure in HNB-PS
Network configuration instance.
g_timer_value is an integer value from 5 through 10. Default: 10
Command Line Interface Reference, Modes G - H, StarOS Release 19
1516
HNB-PS Network Configuration Mode Commands
ranap reset