Cisco Cisco Packet Data Interworking Function (PDIF)
gtp send
Configures which information elements (IE) the SGSN sends in GTP messages. These are required by the
GGSN.
GGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
gtp send { imeisv [ derive-imeisv-from-imei ] | ms-timezone | rai [ use-local-plmn [ network-sharing {
use-selected-plmn | use-ue-plmn | use-common-plmn } ] ] | rat | uli [ use-local-plmn [ network-sharing
{ use-selected-plmn | use-ue-plmn | use-common-plmn } ] ] }
remove gtp send { imeisv | ms-timezone | rai | rat | uli }
no gtp send
use-selected-plmn | use-ue-plmn | use-common-plmn } ] ] | rat | uli [ use-local-plmn [ network-sharing
{ use-selected-plmn | use-ue-plmn | use-common-plmn } ] ] }
remove gtp send { imeisv | ms-timezone | rai | rat | uli }
no gtp send
remove
Removes the specified GTP send definition from the system configuration.
no
Disables the specified GTP send configuration.
imeisv
Instructs the SGSN to include the IMEISV (International Mobile Equipment Identity with Software Version)
of the mobile when sending GTP messages of the type Create PDP Context Request.
of the mobile when sending GTP messages of the type Create PDP Context Request.
By default, this function is disabled.
derive-imeisv-from-imei
This is a filter for the imeisv keyword. It allows the operator to configure the SGSN to send IMEI to the
GGSN as IMEI-SV.
GGSN as IMEI-SV.
This filter instructs the SGSN to add four 1s (1111) to the final semi-octet of the CPCQ (Create PDP Context
Request) message which enables the SGSN to deduce the IMEI-SV value from the IMEI. If this filter is used,
then IMEI is also sent as IMEI-SV when the gmm retrieve-equipment-identity command is configured.
Request) message which enables the SGSN to deduce the IMEI-SV value from the IMEI. If this filter is used,
then IMEI is also sent as IMEI-SV when the gmm retrieve-equipment-identity command is configured.
Command Line Interface Reference, Modes C - D, StarOS Release 19
96
Call Control Profile Configuration Mode
gtp send