Cisco Cisco Packet Data Interworking Function (PDIF)

isr-sequential-paging

This command initiates paging first towards the last known RAT, then towards the other RAT for the Idle
Mode Signaling Reduction (ISR) feature.

Product

SGW

SAEGW

Privilege

Administrator, Security Administrator

Command Modes

Exec > Global Configuration > DDN APN Profile Configuration

configure > ddn-apn-profile ddn_apn_profile_name

Entering the above command sequence results in the following prompt:

[local]

host_name

(ddn-apn-profile

profile_name)#

Syntax Description

[ remove ] isr-sequential-paging

remove

Removes the ISR sequential paging configuration from the DDN APN Profile.

isr-sequential-paging

Enables the ISR sequential paging configuration for the DDN APN Profile.

Usage Guidelines

usage

Examples

Use the following example to enable ISR sequential paging on the S-GW or SAEGW:
isr-sequential-paging

Command Line Interface Reference, Modes C - D, StarOS Release 19

1718

DDN APN Profile Configuration Mode Commands

isr-sequential-paging