Cisco Cisco Packet Data Interworking Function (PDIF)

local-cause-code-mapping no-active-bearers

Configures the reject cause code to send to a UE when the context received from a peer SGSN (during a TAU
procedure) does not contain any active PDP contexts.

Product

MME

Privilege

Administrator

Command Modes

Exec > Global Configuration > Call Control Profile Configuration

configure > call-control-profile profile_name

Entering the above command sequence results in the following prompt:

[local]

host_name

(config-call-control-profile-

profile_name

Syntax Description

local-cause-code-mapping no-active-bearers emm-cause-code { eps-service-not-allowed-in-this-plmn |
network-failure | no-bearers-active | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
remove local-cause-code-mapping no-active-bearers

remove local-cause-code-mapping no-active-bearers

Removes the configured cause code mapping.

no-active-bearers emm-cause-code { eps-service-not-allowed-in-this-plmn | network-failure |
no-bearers-active | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }

Specifies the EPS Mobility Management (EMM) cause code to return when no active PDP context exists.

• eps-service-not-allowed-in-this-plmn

• network-failure

• no-bearers-active

• no-suitable-cell-in-tracking-area

• plmn-not-allowed

• roaming-not-allowed-in-this-tracking-area

• tracking-area-not-allowed

Command Line Interface Reference, Modes C - D, StarOS Release 19

136

Call Control Profile Configuration Mode

local-cause-code-mapping no-active-bearers