Cisco Cisco Packet Data Interworking Function (PDIF)
gs-service
Creates a Gs service instance and enters the Gs Service Configuration Mode. This mode configures the
parameters specific to the Gs interface between the SGSN and the MSC/VLR.
parameters specific to the Gs interface between the SGSN and the MSC/VLR.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
gs-service svc_name [ -noconfirm ]
no gs-service svc_name
no gs-service svc_name
no
Remove the configured Gs service from the current context.
svc_name
Specifies the Gs service as a unique alphanumeric string of 1 through 63 characters.
Service names must be unique across all contexts within a chassis.
Important
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create, edit, or remove a Gs service.
A maximum of 32 Gs service can be configured in one context/system. This limit is subject to maximum of
256 services (regardless of type) can be configured per system.
256 services (regardless of type) can be configured per system.
Command Line Interface Reference, Modes C - D, StarOS Release 19
584
Context Configuration Mode Commands E-H
gs-service