Cisco Cisco Packet Data Interworking Function (PDIF)
ip routing overlap-pool
Configures the routing behavior for overlap-pool addresses.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
[ no | default ] ip routing overlap-pool
default
Resets the command to its default setting of disabled.
no
Disables the routing behavior for overlap-pool addresses for the current context.
Usage Guidelines
Use this command configuration to advertise overlap-pool addresses in dynamic routing protocols when
overlap pools are configured using vlan-ids. If the "iprouting overlap-pool" is configured, then the
overlap-addresses are added as interface addresses and advertised.
overlap pools are configured using vlan-ids. If the "iprouting overlap-pool" is configured, then the
overlap-addresses are added as interface addresses and advertised.
Command Line Interface Reference, Modes C - D, StarOS Release 19
733
Context Configuration Mode Commands I-M
ip routing overlap-pool