Cisco Cisco Packet Data Gateway (PDG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
app-level-retransmission
This command enables/disables application-level retransmissions with the "T" bit set.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Credit Control Configuration
active-charging service service_name > credit-control
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-dcca)#
Syntax Description
app-level-retransmission { set-retransmission-bit | unset-retransmission-bit }
default app-level-retransmission
default app-level-retransmission
default
Configures this command with the default setting.
Default: unset-retransmission-bit
set-retransmission-bit
Sets the retransmission bit.
unset-retransmission-bit
Unsets the retransmission bit.
Usage Guidelines
Use this command to enable application-level transmission with "T" bit set.
'T' bit setting is done only for DIABASE protocol-based rerouting and not for application-based retransmissions.
In order to identify such retransmissions, the server expects the T bit to be set at all levels (both DIABASE
and application) of retransmission, which can be achieved with this CLI command.
In order to identify such retransmissions, the server expects the T bit to be set at all levels (both DIABASE
and application) of retransmission, which can be achieved with this CLI command.
Examples
The following command specifies to set retransmission bit:
app-level-retransmission set-retransmission-bit
app-level-retransmission set-retransmission-bit
Command Line Interface Reference, Modes C - D, StarOS Release 19
991
Credit Control Configuration Mode Commands
app-level-retransmission