Cisco Cisco Packet Data Gateway (PDG)
custom response
Configures reject with specific response code for UE capability failure or UE status. Feature is disabled by
default.
default.
Product
SCM (S-CSCF)
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-cscf-service)#
Syntax Description
custom response { ue-capability-failure capability_type | ue-status status } reject response-code
response_code
no custom response { ue-capability-failure capability_type | ue-status status }
response_code
no custom response { ue-capability-failure capability_type | ue-status status }
no
Removes customer-specific UE capability failure or UE status configuration, if present, and uses default
RFC/3GPP specification behavior.
RFC/3GPP specification behavior.
ue-capability-failure capability_type
Specifies UE capability failure type:
• all - UE capability all
• at - UE capability AT
• audio - UE capability audio
• chat - UE capability CHAT
• cs - UE capability CS
• ft - UE capability FT
• im - UE capability IM
• lte-voip - UE capability LTE-VOIP
• lte-vt - UE capability LTE-VT
Command Line Interface Reference, Modes C - D, StarOS Release 19
1535
CSCF Service Configuration Mode Commands
custom response