Cisco Cisco Packet Data Gateway (PDG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
strict-outbound
When enabled, the CSCF rejects registration without outbound parameters from an already registered AoR
(the AoR would have included outbound parameters in a previous registration). When disabled, the CSCF
allows registration without outbound parameters from the previously registered AoR.
(the AoR would have included outbound parameters in a previous registration). When disabled, the CSCF
allows registration without outbound parameters from the previously registered AoR.
Product
SCM
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-cscf-service)#
Syntax Description
[ no ] strict-outbound
no
Disables the feature. This is the default behavior.
Usage Guidelines
Use this command to reject registration from a previously registered AoR if the AoR fails to register with
outbound parameters but included them in the previous registration.
outbound parameters but included them in the previous registration.
Command Line Interface Reference, Modes C - D, StarOS Release 19
1579
CSCF Service Configuration Mode Commands
strict-outbound