Cisco Cisco Packet Data Gateway (PDG)

Descargar
Página de 1952
local-cause-code-mapping congestion
Configures the reject cause code to send to a UE when a procedure fails due to a congestion condition.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
local-cause-code-mapping congestion emm-cause-code { congestion [ esm-cause-code { congestion |
insufficient-resources | service-option-temporarily-out-of-order } ] | eps-service-not-allowed-in-this-plmn
| network failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
remove local-cause-code-mapping congestion
remove local-cause-code-mapping congestion
Removes the configured cause code mapping.
congestion emm-cause { congestion [ esm-cause-code { congestion | insufficient-resources |
service-option-temporarily-out-of-order } ] | eps-service-not-allowed-in-this-plmn | network failure |
no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when a UE requests access when the
system is exceeding any of its congestion control thresholds.
• congestion - Default
• eps-service-not-allowed-in-this-plmn
• network-failure
• no-suitable-cell-in-tracking-area
• plmn-not-allowed
• roaming-not-allowed-in-this-tracking-area
• tracking-area-not-allowed
   Command Line Interface Reference, Modes C - D, StarOS Release 19
124
Call Control Profile Configuration Mode
local-cause-code-mapping congestion