Cisco Cisco Packet Data Gateway (PDG)
server-name
Enables/disables filling the server name AVP in MAR and SAR for Cx interface with configured server name.
This command is disabled by default.
This command is disabled by default.
The server-name command has been moved to CSCF Service Configuration Mode in StarOS release 14.0
and later.
and later.
Important
Product
SCM (S-CSCF)
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Serving-CSCF
Configuration
Configuration
configure > context context_name > cscf service service_name > serving-cscf
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-cscf-service-serving-cscf)#
Syntax Description
server-name server_name
no server-name
no server-name
no
S-CSCF uses configured cscf-hostname or bind IP address to fill the server name AVP in MAR and SAR for
Cx interface. This is the default CSCF behavior.
Cx interface. This is the default CSCF behavior.
server_name
Configures the name that will be used to fill the server name AVP in MAR and SAR for Cx interface.
name must be from 1 to 63 alpha and/or numeric characters.
Usage Guidelines
Use this command to enable/disable filling the server name AVP in MAR and SAR for Cx interface with
configured server name.
configured server name.
Examples
The following command configures the CSCF server name as stp-c-scscf1.cisco.co.kr:
server-name stp-c-scscf1.cisco.co.kr
server-name stp-c-scscf1.cisco.co.kr
Command Line Interface Reference, Modes C - D, StarOS Release 19
1637
CSCF Serving-CSCF Configuration Mode Commands
server-name