Cisco Cisco Packet Data Gateway (PDG)
local-cause-code-mapping vlr-unreachable
Configures the cause code to send in a ATTACH ACCEPT or TAU ACCEPT to a UE that attachment to the
VLR has failed because a VLR unreachable condition is present.
VLR has failed because a VLR unreachable condition is present.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
local-cause-code-mapping vlr-unreachable emm-cause-code { congestion | cs-domain-unavailable |
imsi-unknown-in-hlr | msc-temp-unreachable | network-failure }
remove local-cause-code-mapping vlr-unreachable
imsi-unknown-in-hlr | msc-temp-unreachable | network-failure }
remove local-cause-code-mapping vlr-unreachable
remove local-cause-code-mapping vlr-unreachable
Removes the configured cause code mapping.
vlr-down emm-cause-code emm_cause_code
Specifies the EPS Mobility Management (EMM) cause code to return when a VLR unreachable condition is
present.
present.
emm_cause_code must be one of the following options:
• congestion
• cs-domain-unavailable
• imsi-unknown-in-hlr
• msc-temp-unreachable - Default.
• network-failure
Command Line Interface Reference, Modes C - D, StarOS Release 19
153
Call Control Profile Configuration Mode
local-cause-code-mapping vlr-unreachable