Cisco Cisco Packet Data Gateway (PDG)
shutdown
Configures a card for active service or terminates all processes on the card.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-card-
slot_number
)#
Syntax Description
[ no ] shutdown
no
no shutdown enables the card.
Enter only the shutdown keyword to shut the card down.
Usage Guidelines
Shut down a card to remove it from service or to enable a card to put it into service.
Do not use this command to remove a card from service for maintenance. Use the command card halt to
remove a card for service to avoid changing or deleting the active-mode configuration. See the Exec Mode
chapter.
remove a card for service to avoid changing or deleting the active-mode configuration. See the Exec Mode
chapter.
Important
Not supported on all platforms
Important
Examples
The following command shuts down the card:
shutdown
shutdown
The following command switches the card to online:
no shutdown
no shutdown
Command Line Interface Reference, Modes C - D, StarOS Release 19
324
Card Configuration Mode Commands
shutdown