Cisco Cisco Packet Data Gateway (PDG)
dhcp-server-profile
Adds a specified Dynamic Host Control Protocol (DHCP) server profile name to allow configuration of DHCP
server profile to the current context and enters the configuration mode for that profile.
server profile to the current context and enters the configuration mode for that profile.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
[ no ]dhcp-server-profile srvr_profile_name [ -noconfirm ]
no
Removes a previously configured DHCP server profile from the current context.
srvr_profile_name
Specifies the name of the DHCP server profile as an alphanumeric string of 1 through 63 characters that is
case sensitive.
case sensitive.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
If this keyword option is used with no dhcp-server-profile srvr_profile_name command the DHCP server
profile named srvr_profile_name is deleted with all active/inactive subscribers without prompting any
warning or confirmation.
profile named srvr_profile_name is deleted with all active/inactive subscribers without prompting any
warning or confirmation.
Caution
Usage Guidelines
Use this command to add a DHCP server profile to a context configured on the system and enter the DHCP
Server Profile Configuration Mode.
Server Profile Configuration Mode.
Command Line Interface Reference, Modes C - D, StarOS Release 19
535
Context Configuration Mode Commands A-D
dhcp-server-profile