Cisco Cisco Packet Data Gateway (PDG)
heartbeat
Configures the IPMS heartbeating between the IPMS-enabled AGW and the IPMS server.
Product
IPMS
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > IPMS Configuration
configure > context context_name > ipms
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx-ipms)#
Syntax Description
heartbeat period dur
[
permitted-failure no_of_failures
]
[
no
|
default
]
heartbeat
default
Configures the heartbeat period and permitted number of failures to the default values of 10 seconds and 1
failure respectively.
failure respectively.
no
Disables/removes the configured heartbeat period and permitted number of failures.
period dur
Specifies the periodicity (in seconds) between heartbeat messages as an integer from 1 through 3600. Default:
10
10
permitted-failure no_of_failures
Specifies the number of errors/failures allowed before declaring an IPMS server as dead/unreachable as an
integer from 1 through 10. Default: 1
integer from 1 through 10. Default: 1
Usage Guidelines
Use this command to configure the heartbeat message periodicity and permissible failure of heartbeat message
response before declaring an IPMS server as dead or unreachable. When an IPMS server is declared down
an SNMP trap is sent.
response before declaring an IPMS server as dead or unreachable. When an IPMS server is declared down
an SNMP trap is sent.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
73
IPMS Client Configuration Mode Commands
heartbeat