Cisco Cisco Packet Data Gateway (PDG)
always-on-indication
Enables/disables the inclusion of 3GPP2 Always On Indicators in messages to the PCF.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
Syntax Description
always-on-indication
no always-on-indication
no always-on-indication
no
Disables the sending of 3GPP2 Always On Indication messages.
Usage Guidelines
This command is available when the 3GPP2 Always-On RP Extensions feature-use license is installed.
When enabled, this command causes the PDSN service to include the Always On Indicators in the Normal
Vendor Specific Extension (NVSE) part of an A11 Session Update message to the PCF. The indicator will
only be sent for those subscriber sessions in which Always On functionality is enabled as determined after a
successful authentication: the 3GPP2-Always-On attribute is set to a value of 1 (Active) for subscribers
configured on a AAA server, or the always-on parameter is set for locally configured subscribers.
Vendor Specific Extension (NVSE) part of an A11 Session Update message to the PCF. The indicator will
only be sent for those subscriber sessions in which Always On functionality is enabled as determined after a
successful authentication: the 3GPP2-Always-On attribute is set to a value of 1 (Active) for subscribers
configured on a AAA server, or the always-on parameter is set for locally configured subscribers.
This functionality is enabled by default.
Examples
Use the following command to Enables the inclusion of 3GPP2 Always On Indicators in messages to the PCF.
always-on-indication
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1542
PDSN Service Configuration Mode Commands
always-on-indication