Cisco Cisco Packet Data Interworking Function (PDIF)
ip vrf
Configures the Virtual Routing and Forwarding (VRF) instances for OSPF routing protocol.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > OSPF Configuration
configure > context context_name > router ospf
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-ospf)#
Syntax Description
[
no
]
ip vrf vrf_name
no
Disables the VRF instances and removes the configured VRF context association for OSPF routing.
vrfvrf_name
Configures Virtual Routing & Forwarding (VRF) parameters.
vrf_name is name of a preconfigured VRF context configured in Context Configuration Mode via the ip vrf
command. It is an alphanumeric string of 1 through 63 characters.
command. It is an alphanumeric string of 1 through 63 characters.
Usage Guidelines
Use this command to configure the IP VRF forwarding also to associate the preconfigured VRF context with
the specific tunnel interface.
the specific tunnel interface.
This command creates and enters the OSPF VRF Configuration Mode if required to configure the VRF context
instances for OSPF routing.
instances for OSPF routing.
Examples
The following command enables preconfigured VRF context instance ospf_vrf1 for OSPF routing and enters
the OSPF VRF Configuration mode:
ip vrf ospf_vrf1
the OSPF VRF Configuration mode:
ip vrf ospf_vrf1
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1146
OSPF Configuration Mode Commands
ip vrf