Cisco Cisco Packet Data Interworking Function (PDIF)
diameter origin end-point
This command is used to bind/associate a pre-configured Diameter host/realm (SSC/SPR) over Sp interface
with a PCC-Quota service to be used for subscriber quota management.
with a PCC-Quota service to be used for subscriber quota management.
Product
IPCF
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Quota Service
Configuration
Configuration
configure > context context_name > pcc-quota-service service_name
Syntax Description
diameter origin endpoint dia_endpoint_name
no diameter origin endpoint
no diameter origin endpoint
no
Removes the associated Diameter Origin Endpoint configuration from PCC-Quota service instance configured
for IPCF configuration.
for IPCF configuration.
any
Sets the PCC-Quota service instance to use any available PCEF/DPI node over Sp interface for quota
management.
management.
dia_endpoint_name
The dia_endpoint_name is a predefined Diameter origin endpoint node and must be an alphanumerical string
from 1 through 63 characters.
from 1 through 63 characters.
Usage Guidelines
Use this command to bind the SSC/SPR node over Sp interface by associating a pre-configured Diameter
Origin Endpoint with a PCC-Quota service.
Origin Endpoint with a PCC-Quota service.
The Diameter origin endpoint must be a pre-configured instance in the Context Configuration Mode. For
more information on Diameter origin endpoint configuration, refer Diameter Endpoint Configuration Mode
Commands chapter.
more information on Diameter origin endpoint configuration, refer Diameter Endpoint Configuration Mode
Commands chapter.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1420
PCC-Quota Service Configuration Mode Commands
diameter origin end-point