Cisco Cisco Packet Data Interworking Function (PDIF)
gtpc
Configure the GTP-C parameters for this peer profile.
Product
GGSN
P-GW
SAEGW
S-GW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Peer Profile Configuration
configure > peer-profile service-type <service-type> {default | name peer_profile_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-peer-profile-ggsn/pgw/sgw-access/nw)#
Syntax Description
gtpc { echo { interval inter_dur | retransmission-timeout echo_retrans_dur } | max-retransmission
retrans_num | retransmission-timeout retrans_dur }
default gtpc { echo [ interval | retransmission-timeout ] | max-retransmissions | retransmission-timeout
retrans_num | retransmission-timeout retrans_dur }
default gtpc { echo [ interval | retransmission-timeout ] | max-retransmissions | retransmission-timeout
}
no gtpc echo
default
Resets the specified parameter to its default value.
no
Disables or removes the configured GTP-C echo settings.
echo interval inter_dur
Default: 60
Configures the duration, in seconds, between the sending of echo request messages.
inter_dur must be an integer from 60 through 3600.
echo retransmission-timeout echo_retrans_dur
Default: 3
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1644
Peer Profile Configuration Mode Commands
gtpc