Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
ip ospf transmit-delay
This command configures the transmit-delay the OSPF communications parameters.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PVC Interface Configuration
configure > context context_name > interface interface_name point-to-point
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-if-pvc)#
Syntax Description
ip ospf transmit-delay value
no ip ospf transmit-delay
no ip ospf transmit-delay
no
Deletes the value set and returns the value to its default.
transmit-delay value
The interval, in seconds, that the router should wait before transmitting a packet.
value must be an integer from 1 through 65535. Default: 1
Usage Guidelines
Use this command to set the transmit-delay.
Examples
To set the transmit delay to 5 seconds, use the following command;
ip ospf transmit-delay 5
ip ospf transmit-delay 5
To delete the setting for the transmit-delay or reset the transmit-delay value to its default of 1, use the following
command'
no ip ospf transmit-delay
command'
no ip ospf transmit-delay
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1782
PVC Interface Configuration Mode Commands
ip ospf transmit-delay