Cisco Cisco Packet Data Interworking Function (PDIF)
encryption-algorithm-lte
Configures the precedence for LTE encryption algorithms to use for security procedures through this MME
service.
service.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-service)#
Syntax Description
encryption-algorithm-lte priority1 { 128-eea0 | 128-eea1 | 128-eea2 } [ priority2 { 128-eea0 | 128-eea1 |
128-eea2 } ] [ priority3 { 128-eea0 | 128-eea1 | 128-eea2 } ]
default encryption-algorithm-lte
128-eea2 } ] [ priority3 { 128-eea0 | 128-eea1 | 128-eea2 } ]
default encryption-algorithm-lte
default
Sets the default LTE encryption algorithm for security procedures with configured priority value. Lowest
value has highest preference. Default configuration of LTE encryption algorithm is:
value has highest preference. Default configuration of LTE encryption algorithm is:
• priority1 with 128-eea0 encryption algorithm
• priority2 with 128-eea1 encryption algorithm
• priority3 with 128-eea2 encryption algorithm
priority1
Specifies the preference of integrity algorithm for security procedures on this MME service as priority 1.
priority2
Specifies the preference of integrity algorithm for security procedures on this MME service as priority 2.
priority3
Specifies the preference of integrity algorithm for security procedures on this MME service as priority 3.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
872
MME Service Configuration Mode Commands
encryption-algorithm-lte