Cisco Cisco Packet Data Gateway (PDG)
show ip static-route
Displays information related to currently configured static routes.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show ip static route [ ip_address/mask ] | { grep grep_options | more ]
ip_address/mask
Specifies an IP address/mask (CIDR) for a static route in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation.
colon-separated-hexadecimal notation.
| { grep grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to display information about IP static routes.
Examples
To display detailed information about route 192.155.33.2/24, enter the following command:
show ip static route 192.155.33.2/24
show ip static route 192.155.33.2/24
Output descriptions for commands are available in the Statistics and Counters Reference.
Important
Command Line Interface Reference, Modes E - F, StarOS Release 19
1210
Exec Mode show Commands (H-L)
show ip static-route