Cisco Cisco Packet Data Gateway (PDG)
show ipv6 neighbors
Displays the neighbor table for all IPv6 addresses or a specified IPv6 address in the current context.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show ipv6 neighbors [ ipv6_address ] [ vrf vrf-name ] [ | { grep grep_options | more } ]
ipv6_address
Displays information for an existing IPv6 address specified in IPv6 colon-separated-hexadecimal notation.
If no IPv6 address is specified, the information for all IPv6 addresses is displayed.
If no IPv6 address is specified, the information for all IPv6 addresses is displayed.
vrf vrf_name
Displays Virtual Routing and Forwarding (VRF) routing information for an existing VRF specified as an
alphanumeric string of 1 through 63 characters.
alphanumeric string of 1 through 63 characters.
| { grep grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to display neighbor information for IPv6 address(es) in the current context. This information
can be used to verify and/or troubleshoot communication difficulties between to a remote host/node.
can be used to verify and/or troubleshoot communication difficulties between to a remote host/node.
Examples
The following command displays the neighbor information for the IPv6 address ffe:ffff:101::230:6eff:fe04:d9aa.
show ipv6 neighbor ffe:ffff:101::230:6eff:fe04:d9aa
show ipv6 neighbor ffe:ffff:101::230:6eff:fe04:d9aa
Command Line Interface Reference, Modes E - F, StarOS Release 19
1225
Exec Mode show Commands (H-L)
show ipv6 neighbors