Cisco Cisco Packet Data Gateway (PDG)
show mme-service session
Displays session information for Mobile Management Entity (MME) service(s) running on a peer or local
system.
system.
Product
MME
Privilege
Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show mme-service session [ summary | full | counters ] [ all | callid call_identifier | imei imei_id | imsi
imsi_id | ipsec | mme-service service_name | msisdn number | pdn-address pdn_ip_address | s1-peer
s1_peer_ip_address | s11-peer s11_peer_ip_address | vlr-name vlr_name | ue-ecm-state { connected | idle
imsi_id | ipsec | mme-service service_name | msisdn number | pdn-address pdn_ip_address | s1-peer
s1_peer_ip_address | s11-peer s11_peer_ip_address | vlr-name vlr_name | ue-ecm-state { connected | idle
} ] [ | { grep grep_options | more } ]
summary
Displays summarized output for this command.
full
Displays detailed output for this command.
counters
Displays all counters for related events and messages for an MME session running on a system.
all
Displays information for all MME sessions running on this system.
callid call_identifier
Displays summarized or detailed configuration information for an MME session filtered by a call identifier
within an MME service configured on this system.
within an MME service configured on this system.
call_identifier must be an existing call identity in 8-digit hexadecimal format running in an MME service on
this system.
this system.
Command Line Interface Reference, Modes E - F, StarOS Release 19
1319
Exec Mode show Commands (M-P)
show mme-service session