Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco
  4. Cisco Packet Data Gateway (PDG)

Cisco Cisco Packet Data Gateway (PDG)

Descargar
Página de 1824
firewall udp-checksum-error
This command configures Stateful Firewall action on packets with UDP Checksum error.
Product
PSF
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Firewall-and-NAT Policy Configuration
active-charging service service_name > fw-and-nat policy policy_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-fw-and-nat-policy)#
Syntax Description
firewall udp-checksum-error { drop | permit }
default firewall udp-checksum-error
default
Configures the default setting.
Default: drop
drop
Drops packets with UDP Checksum error.
permit
Permits packets with UDP Checksum error.
Usage Guidelines
Use this command to configure Stateful Firewall action on packets with UDP Checksum error.
For NAT-only calls, packets with UDP Checksum error are permitted.
Examples
The following command specifies to drop packets with UDP Checksum error:
firewall udp-checksum-error drop
Command Line Interface Reference, Modes E - F, StarOS Release 19    
1715
Firewall-and-NAT Policy Configuration Mode Commands
firewall udp-checksum-error