Cisco Cisco Packet Data Gateway (PDG)
debug ip ospf route
Sets the route calculation method to use in debugging OSPF routes. If no route calculation method is specified,
all methods are enabled. If logging is enabled, results are sent to the logging system.
all methods are enabled. If logging is enabled, results are sent to the logging system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
[ no ] debug ip ospf route [ ase | ia | install | spf ]
no
Disables debugging of route information. If no keyword is specified all information types are disabled.
ase
Enables debugging information on autonomous system external (ASE) route calculations.
ia
Enables debugging information on Inter-Area route calculations.
install
Enables debugging information on route installation.
spf
Enables debugging information on Shortest Path First (SPF) route calculations.
Usage Guidelines
Use this command to output debug information for OSPF routes.
Command Line Interface Reference, Modes E - F, StarOS Release 19
501
Exec Mode Commands (D-S)
debug ip ospf route