Cisco Cisco Packet Data Interworking Function (PDIF)
show ip route
Displays information related to currently configured static or VRF routes for the current context.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show ip route [ ip_address/mask | vrf vrf_name ] [ | { grep grep_options | more ]
ip_address/mask
Specifies an IP address/mask (CIDR) for a static route in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation.
colon-separated-hexadecimal notation.
| vrf vrf_name
Displays information for an existing Virtual Routing and Forwarding (VRF) name expressed as an alphanumeric
string of 1 through 63 characters.
string of 1 through 63 characters.
| { grep grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to display information related to currently configured static or VRF routes for the current
context.
context.
Examples
To display detailed information about a route for a static IP address, enter the following command:
show ip route 10.1.0.0/24
show ip route 10.1.0.0/24
Command Line Interface Reference, Modes E - F, StarOS Release 19
1207
Exec Mode show Commands (H-L)
show ip route