Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
show mpls cross-connect
Displays Multiprotocol Label Switching (MPLS) cross-connect information.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show mpls cross-connect [ | { grep grep_options | more } ]
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
the output will be sent.
For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section
in the Command Line Interface Overview chapter.
in the Command Line Interface Overview chapter.
Usage Guidelines
This command displays MPLS cross-connect information. MPLS tunnel cross-connects between interfaces
and Label-Switched Paths (LSPs) connect two distant interface circuits of the same type by creating MPLS
tunnels that use LSPs as the conduit.
and Label-Switched Paths (LSPs) connect two distant interface circuits of the same type by creating MPLS
tunnels that use LSPs as the conduit.
Examples
The following command displays MPLS cross-connect information:
show mpls cross-connect
show mpls cross-connect
Output descriptions for these commands are available in the Statistics and Counters Reference.
Important
Command Line Interface Reference, Modes E - F, StarOS Release 19
1326
Exec Mode show Commands (M-P)
show mpls cross-connect