Cisco Cisco Packet Data Interworking Function (PDIF)
show call-control-profile
Displays information for call control profiles configured on the system.
Product
MME
SGSN
Privilege
Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show call-control-profile { all | full { all | name profile_name } | name profile_name } [ | { grep grep_options
| more } ]
all
Lists all call-control profiles configured on the system.
full { all | name profile_name }
full: Displays a full set (all) of available information in the call-control profile.
all: Displays a full set of available information for all call-control profiles configured on the system.
name profile_name: Displays full information for an existing call-control profile specified as an alphanumeric
string of 1 through 64 characters.
string of 1 through 64 characters.
name profile_name
Displays information for an existing call-control profile specified as an alphanumeric string of 1 through 64
characters.
characters.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Command Line Interface Reference, Modes E - F, StarOS Release 19
935
Exec Mode show Commands (A-C)
show call-control-profile